AMSOIL DOMINATOR® Synthetic 2-Cycle Racing Oil (TDR),Provides excellent film strength,high heat,RPM motors,Reduces friction,maximum power,Recommended,coated or non-coated racing pistons, exhaust power valves,high octane racing gas,Burns clean,Prevents ring sticking,plug fouling,Provides excellent protection,50:1 pre-mix,injection system,two-cycle oils,virtually eliminates, damaging deposits,piston skirts, ring grooves,valves,injector oil,50:1 mix ratio,carbureted,electronic fuel Injected (EFI),direct fuel injected (DFI),snowmobiles,personal watercraft,motorcycles, ATVs,jet boats,Super Film Strength,High,performance,motors,compression ratios,combustion chamber heat,crankshaft bearing pressures,Hot,burn off,evaporate light,rapid piston expansion, decreasing piston-to-cylinder wall clearances, promotes piston scuffing,possible seizure,increased pressure,crankshaft bearings,metal-to-metal contact, wear,pitting,heat,pressures require tough,better film strength,lubricity,constructed, heavy synthetic oil, handles,petroleum,mineral oils,improved film strength,lubricity,friction,extra measure,Clean Burning,combustion,proper additives,control deposits,strong,temperature detergent additives,highly pure,prevents deposits,ring sticking, plug fouling,exhaust port blocking,optimized product,service,Applications,stock,modified two-cycle motors,including air, liquid cooled,(Moto X),go-carts,outboard motors*,coated,non-coated pistons,high-octane racing fuels,exhaust power valves

Provides excellent film strength for high heat, high RPM motors
Reduces friction for maximum power
Recommended for use with coated or non-coated racing pistons
Recommended for use with exhaust power valves
Recommended for use with high octane racing gas
Burns clean; Prevents ring sticking and plug fouling
Provides excellent protection at 50:1 pre-mix or in injection system

See Article: Two-Cycle Engine Applications and Lubrication Needs

Super Film Strength
High performance two-cycle motors have high compression ratios, which significantly increase combustion chamber heat and crankshaft bearing pressures. Hot combustion processes quickly burn off and evaporate light oils and cause rapid piston expansion, decreasing piston-to-cylinder wall clearances. This promotes piston scuffing and possible seizure. And increased pressure on crankshaft bearings promotes metal-to-metal contact, wear and pitting.

High heat and pressures require tough oil with better film strength and more lubricity. DOMINATOR, constructed with AMSOIL heavy synthetic oil, handles high heat better than mineral oils and provides improved film strength and lubricity. DOMINATOR reduces friction and provides an extra measure of protection against piston scuffing and crankshaft bearing wear.

Clean Burning
High combustion processes require the proper additives and oils to control deposits. DOMINATOR contains strong, high temperature detergent additives and highly pure AMSOIL synthetic oil. It prevents deposits that cause ring sticking, plug fouling and exhaust port blocking. DOMINATOR is an optimized product for severe service.

Applications (2-Cycle Recommendations Chart)
DOMINATOR is recommended for use in high performance stock or modified two-cycle motors, including air or liquid cooled snowmobiles, personal watercraft, motorcycles (Moto X), ATVs, go-carts and outboard motors*. Good for use with coated or non-coated pistons, high-octane racing fuels and exhaust power valves. Compatible with most other two-cycle oils, however, mixing oils should be minimized.

Use at 50:1 pre-mix ratios (2.6 oz. oil per U.S. gallon of gas) or as injection oil where JASO FC or API TC oils are specified. Not suitable for use with alcohol or nitro-methane fuels.

* Not suitable for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short-term use where motors are periodically inspected.